Resilmount A50R-2 4 in Black Resilient Isolation Hanger

Resilmount

  • $3.50


Resilmount A50R-2 4 in Black Resilient Isolation Hanger

Resilmount A50R-2 4 in Black Resilient Isolation Hanger

The Resilmount A50R-2 is designed to absorb sound vibrations and support drop ceilings or internal suspended ceiling systems while providing optimal acoustic isolation. Because noise and vibrations are transmitted and amplified in drop ceilings, isolation hangers made with resilient rubber are great to break up sound waves.

The noise absorption properties of the Resilmount A50R-2 allow it to deflect 3/16” when loaded to 120 lbs., which provides optimal isolation of transferred noise in accordance with US Standards. The Resilmount A50R-2 is easy to install into new or existing ceiling systems and does not reduce the load capacity of the ceiling systems. The Resilient Isolation Hangers isolates the ceiling system from the structure to reduce structure and airborne noise.

Resilmount A50R-2 4 in Black Resilient Isolation Hanger Features:

  • Works with all hanger wire
  • Easy installation into new or existing ceiling systems
  • Meets all Standards and guidelines- STC and IIC
  • Will deflect 3/16” when loaded to 120lb capacity and maintain optimal sound isolation in accordance with US Standards.
  • Does not reduce the load capacity of the ceiling system
  • Suitably isolates the ceiling system from the structure to reduce structure-borne noise
  • Elastomer Type: Natural Rubber
  • Load capacity: 120 Lbs.

Installation:

When calculating the mass of the ceiling system it is recommended to increase the calculation by 10-20% in order to avoid overloading of the isolation element. The ceiling system needs to be accurately weighed and point loads assessed in accordance with the architectural specifications of the project if maximum rated deflections are required. Once the hanging wire has been hung from the substrate, the lower end of the wire needs to be bent up in accordance with the ceiling system manufacturers specifications, providing a ‘hook’ on which the Resilmount™ A50R-2 can be hung. Once the mount is in place, another section of hanging wire is required to be bent and inserted through the lower side of the Resilmount™ A50R-2. The shaft of this wire then becomes the mounting point for the ceiling suspension clip.

View Full Installation Instructions

View Product Datasheet

View Technical Manual

Resilmount

A50R-2


We Also Recommend