Lift Safety Dax Carbon Fiber Cap Jungle Camo HDCC-20CJ

Lift Safety Dax Carbon Fiber Full Brim Hard Hat Jungle Camo HDC-20CJ

AVAILABLE NOW!

The All New DAX Jungle Camo Carbon Fiber Camo Cap. The DAX Carbon Fiber Hardhat is Lift Safety’s Cap Version, carbon fiber reinforced resin hard hat offering a 6 point suspension system for superior comfort and impact protection. It features an innovative Clarino® synthetic leather comfort dome and an over-sized ratcheting fitment dial that makes adjustment easy even while wearing gloves.

Lift Safety Dax Carbon Fiber Full Brim Hard Hat Jungle Camo HDC-20CJ Features:

• Carbon Fiber reinforced resin shell for superior impact protection
• Brim grip, exclusive design provides a secure feel
• Perforated Clarino® synthetic leather comfort dome with molded EVA foam insert for additional shock absorbing protection to the top of head
• Oversized ratcheting fitment dial to adjust size, easy to grip and use with gloves on
• Meets ANSI Z89.1-2014 requirements for Type 1, Class C
• Moisture-wicking foam backed microfiber liner reduces sweat build-up
• 6 point suspension system for a secure, comfortable fit
• Triple reinforced crown for superior impact protection
• Suspension can be rotated 180 degrees for reverse wear 

The Lift Safety Dax Caps can be worn in reverse by removing the suspension and rotating it.

To Remove & Rotate your Suspension

To Remove:

1. Firmly grasp the black strap between your thumb and closed pointer finger
2. Using your thumb as leverage on the hard hat’s bottom edge, apply pressure upwards while keeping the black strap as close to the hard hat’s top shell as possible.
3. When enough pressure is applied the metal clip will make a ‘pop’ indicating it is clear of the rivet.
4. Remove the full clip and continue on until all six clip points are disconnected.

To Re-attach:

1. Slip the metal clip’s two prongs (facing towards the top of the hard hat) over the rivet.
2. Grip the black strap between thumb and forefinger and apply pressure towards the hard hat’s top.
3. The metal clip will make a ‘pop’ indicating it’s locked into position.
4. Install the remaining clips in the same fashion in a clockwise motion. 

Lift Safety

HDCC-20CJ